One of my marker light bulbs and my left turn light bulbs need to be replaced. I tried to search for info on how to do this. Can anyone recommend a source to figure out how to do this. TIA
Probably any place that works on trailers can take care of that for you. Heck, I am thinking even the average mechanic can fix that.
Trailer lights are readily available on-line --depending on what you need, most LED simply pop out and pop in . . . cost less than $5. Can you post a picture of what you need?
The rear lights are like these except vertical. Two on each side. Do I need a whole new lamp or just the bulb?
https://trailerparts.com/oval-tail-light-kit-6-oval-tail-light.html?gclid=Cj0KEQiA9ZXBBRC29cPdu7yuvrQBEiQAhyQZ9OaV7SV1cSuIPPiKgBtRGJu6JHZ62tDYL6UDb6lUAO8aAq3i8P8HAQ
There aren’t many trailer repair mechanics near me
They should just “pop out” if they are like my Featherlight (a 2002 model). The rubber grommet advertised on the same page holds it in.
You might be able to work it out by hand; if not a screwdriver gently used should work. You’re replacing the whole unit, anyway, so if you break it it’s “no harm, no foul.” Take a look at the rubber; it it’s dried out or really stiff order a new grommet.
Good luck in your project.
G.
Awesome thank you! Yes it is a 2002
Okay, so the light bulbs are fine once the vehicle is wired correctly :yes: Finally found a trailer mechanic. Drove the 90 minutes one way, they fixed my wiring job and I got new brakes all around!! 
