Hi, we have a 2000 Landini Ghibli 100 tractor with a 10 foot woods cutter attached via the pto. We were bushhogging in the pasture and hit a small dirt ridge which caused the cutter to quit and stalled out the tractor. Now the tractor is totally dead, i.e., no lights, no panel indicators, no nothing. Voltmeter tests battery as ok and grounding wire is ok. We are told that maybe there is a safety switch or something that got tripped in the process of stalling out, but cannot find it. We disconnected the cutter from the pto, made sure all gears in neutral, pto off, etc. (unless there is something we’ve missed). Just totally perplexed and no one can come out to help. (We are in the SE USA). Thank you for any help or suggestions.
Did you ever figure this out?
Was it a fuse? I had a similar event except in my case the tractor did turn back on, but after that my 4x4 would not engage.
