Need 4.5 or 4.75" mullen western bit

[Christa_P]

Where can I find one? This is so a kid can use my pony in 1 or 2 4H shows so I don’t want to spend a lot. She drives very well in a mullen mouth Liverpool driving bit with swivel cheeks and minimal curb action and the same bit is fine for riding her, but it won’t pass for showing. The pony is 21 so can’t get away with a snaffle (besides with a snaffle she actually gets away with way too much :lol:).

I have checked eBay, and I don’t mind used if somebody has something laying around.

I can find what I want in 5", but except for very cheap curb bits, I can’t find many western bits in smaller sizes.

So where do I find a 4.5" (ideal) or 4.75" (will work) mullen mouth or very minimal port with non-fixed, short cheeks, that will pass in a western class relatively cheap (around $30 or less if possible).

Christa

[gaitedincali]

http://www.faulknerssaddlery.com/ecommerce/bits-accessories/tear-drop-bits/5-8-smooth-oval.py -comes in a 4 3/4" option. A little bit more $$$$ though.

Under $30 pretty much limits you to imported mass-produced bits that are going to be limited in option.

[Christa_P]

[QUOTE=gaitedincali;7034697]
http://www.faulknerssaddlery.com/ecommerce/bits-accessories/tear-drop-bits/5-8-smooth-oval.py -comes in a 4 3/4" option. A little bit more $$$$ though.

Under $30 pretty much limits you to imported mass-produced bits that are going to be limited in option.[/QUOTE]

Thank you, that might work and could also be used with my TB as a trail bit later (she also takes a 4.75").

I know the $30 is low, but unless I use the bit with my TB it probably only be used a few times, then sit around forever. Combine that with my very limited budget in general and you get the idea.

Christa